Latest topics
UPCOMING R/C EVENTS
Ray & Robbins Hobby Center - Falmouth
RC Excitement - Fitchburg Mass.
106 RACEPARK - Pembroke NH
Breakneck R/C - Livermore Falls
5 posters
Cut ESC to Receiver wire... any suggestions?
Tekin_Tim- Posts : 60
Join date : 2013-05-01
Like an idiot while I was soldering my new Tekin I got careless with the solder iron and melted through the wires that connect the receiver. Aside from soldering them back together and making a big booger job with electrical tape anyone have a nice clean, secure idea?
rcracer207- Admin
- Posts : 363
Join date : 2009-07-17
Age : 41
Location : Casco, ME
Your solder and electrical tape booger fix is the easiest and quickest probably. The other thing you could do is use a set of small male and female bullet plugs like the ones used on lipo balance plugs but that's more time and money.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJPY0&P=7
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJPY1&P=ML
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJPY0&P=7
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJPY1&P=ML
mtrucker- Posts : 87
Join date : 2009-06-29
Solder it and use the right size heat shrink tubing,,good as new!
RAZORBURN- Posts : 98
Join date : 2009-07-01
Age : 47
Location : MAINE
You can also buy the jct connectors and just make a new connection. If you solder them I always step splice them so your splices are not all in the same area, this helps keep the bulk splice down.
http://compare.ebay.com/like/300829741556?var=lv<yp=AllFixedPriceItemTypes&var=sbar
http://compare.ebay.com/like/300829741556?var=lv<yp=AllFixedPriceItemTypes&var=sbar
Fixerdude- Posts : 68
Join date : 2010-02-14
Location : Lisbon Maine
Good advice. Staggered splices are always the way to go. Might also want to use heat shrink tubing that has glue inside. Widely available, and makes a water tight corrosion free connection!
Sun May 06, 2018 3:32 pm by legend61
» dieing out ?
Wed Mar 21, 2018 4:43 pm by bob.less13
» assoc.b5mbuggy
Tue Oct 10, 2017 11:23 pm by legend61
» looking to sell
Thu Oct 05, 2017 5:05 pm by truck2552
» Thank you to all who attended
Tue Aug 22, 2017 6:03 pm by iceman48
» This Sunday Sammy's Bash @ R&R's
Thu Aug 17, 2017 10:50 am by iceman48
» One month to the first R&R bash 8-20-17
Thu Aug 17, 2017 8:36 am by legend61
» assoc.b5m buggy
Thu Jun 15, 2017 7:19 pm by truck2552
» Bash day August 20th @ Ray and Robins.
Fri Jun 02, 2017 5:54 pm by iceman48